Medical air plants
GAZ SYSTEMES provides a range of compressed air systems for hospitals, which are being used for medical compressed air and for surgical air systems. The two applications are combined on a single plant as the use of surgical air will demand more pressure and more flow however the quantity of surgical air outlets being used at the same time is very low and the outlets are used during a very limited period of time.
GAZ SYSTEMES compressed air systems include a compressor, which can be of various technology, a compressed air tank duly coated, an air dryer (dessicant or refrigerant), a medical grade filtration system and a pressure reducing device.
The plant is composed of :
- 1 Rotary screw compressor
- 1 Vitroflex AirTANK
- 1 Dessicant air dryer
- 1 Set of filtration <0,01 um
- 1 Bacteria sterile filter
in stainless steel
Technical characteristics :
- Ambient Temperature: 45°C
- Pressure of service: Up to 10 bar
- Power supply: 400V AC 50Hz
- Air Inlet Temperature: 55°C
The Dessicant Air Dryer provided by GAZ SYSTEMES is very efficient and overtakes the specifications of the European Pharmacopea :
- Under Pressure Dew Point of –40°C
- Contains a catalyst to convert the CO into CO2
- Contains CO2 adsorption tower
- Contains activated carbon to remove residual
organic compounds and odour
Using ambient air, these units produce medical
quality air by following the steps below :
- Compression
- Drying with an adsorption dryer
- Complete filtration to obtain the quality
required by the European Pharmacopoeia - Expansion to 4 bar/7 bar
| Available Models (Bigger models available on request) | Air Flow @10 bar |
|---|---|
| MedAIR 06 | 4,7 m3/h |
| MedAIR 12 | 9,5 m3/h |
| MedAIR 24 | 19,0 m3/h |
| MedAIR 36 | 28,4 m3/h |
| MedAIR 60 | 47,4 m3/h |
| MedAIR 75 | 59,3 m3/h |
| MedAIR 105 | 83 m3/h |
| MedAIR 150 | 118 m3/h |
| MedAIR 200 | 166 m3/h |
| MedAIR 300 | 332 m3/h |